Packing box room_ Compared with the movable plank house, most people will be relatively unfamiliar, but it is widely used in modern architecture because of its unique advantages. Prefabricated houses are also divided into different types, and the more common is color steel prefabricated houses.

The color steel sandwich panel has the characteristics of heat insulation, corrosion prevention, sound insulation and noise reduction, light flammability, good seismic resistance, solid and beautiful appearance, convenient installation, reasonable and effective improvement of the use area of the house, and no need for secondary decoration. The structural stability of color steel movable plank house is safe and reliable. The roof adopts waterproof structure, without additional waterproof treatment. The interior and exterior walls and roofs are bright in color, mild in texture, flat in surface, and well coordinated with the steel frame composite pipe of the house, which has a good decorative effect, and the interior of the house is also highly decorative. Let's join Dongguan old plank house company to learn how to install plank houses:

1. According to the performance characteristics of the movable plank house, it is in a slope shape at an appropriate angle. During the assembly process, the assembly must be carried out according to the appropriate inclination angle. The wallboard shall be cut at an appropriate angle, and the connection of the two wallboards shall be fixed with rivets.

2. As described below, reinforced concrete structure shall be adopted around the movable plank house and partition wall to obtain a firm effect. The frame structure shall be connected to the supporting beams. Before the lower plate hardens, the upper partition wall and the outer wall partition wall should be assembled in place, and then the doors and windows can be assembled.

3. After installation, the water level should also be checked with a level gauge. At the same time, there is no gap between the corner and the edge during the installation of the outer bread edge. Then, rivet it to completely fix the base and the wall.